Pre-engineered Wall Systems

wall-systems

Butlerib® II Wall System

Butlerib® II Wall System is the fundamental wall system for any Butler® building.

Features & Benefits

  • Unlimited design freedom—can be used alone or incorporated with other materials such as brick, EIFS, and other Butler® metal wall systems
  • Factory-punched panels and structural members assure proper fit and alignment
  • Available in 24 or 26 gauge
  • Panels are 3’ in width and up to 40’ in length
  • Deep 1-1/2” corrugation provides extra strength
  • Can accommodate up to 4” of insulation
  • A variety of fastener options to meet your aesthetic and security needs
  • Superior-performance Butler-Cote™ finish system (Kynar 500® or Hylar 5000®) adds beauty and protection

button


Shadowall™ Wall System

Shadowall™ Wall System combines an architecturally pleasing appearance with exceptional energy efficiency.

Features & Benefits

  • Recessed fasteners give walls an attractive and uniform appearance with smooth, clean lines
  • Panel widths are 36”, with lengths available up to 40’
  • Factory-punched panels and structural members assure proper fit and alignment
  • Butler-Cote™ fluoropolymer coating available in a variety of low-gloss colors
  • Thermal break window frame available in a variety of sizes and colors
  • Requires up to 33% fewer fasteners for lower installation cost and reduced heat loss
  • Deep 1-7/16 corrugations provide strength to resist billowing when fasteners are installed
  • No additional framing needed to support the installation

button


eShadowall™ Wall System

eShadowall™ Wall System adds life cycle cost savings to building projects where energy efficiency is a chief concern.

Features & Benefits

  • Energy efficiency is gained through the uniqe assembly design of the eShadowall™ panel, thermal spacer blocks and fiberglass blanket insulation.
  • Exclusive factory-punched panels allow for speedy installation and ensure long-term building performance.
  • Up to 33 percent fewer fasteners than most wall panel systems, reducing installation costs and preventing heat loss.
  • Semi-concealed fasteners and deep corrugation further enhance panel appearance.
  • High-performing Butler-Cote™ 25-year fluoropolymer finish resists chalking and fading.
  • Versatile system can be used with Butler roof and structural systems for all building types.

button


StylWall® II Flat Wall System

StylWall® II Flat Wall System is a factory-insulated flat wall system with concealed fasteners for a smooth, monolithic appearance.

Features & Benefits

  • Attractive broad-ribbed design and embossed surface produces interesting shadows and consistent texture
  • Special interlocking joint design allows panels to easily “lock” into place for faster installation
  • Can be combined with other Butler® wall systems or brick, glass, and other conventional materials
  • 16” panel width, combined with the side “return leg,” enables application of almost any conventional finish on the interior of the wall system
  • Factory-installed rigid insulation board for enhanced energy efficiency
  • Available in several visually appealing colors

button


eStylWall™ II Flat Wall System

eStylWall™ II Flat Wall System is designed to help buildings meet evolving energy codes, which serve as the foundation of many state energy requirements.

Features & Benefits

  • Energy efficiency is enhanced through the unique assembly design of the eStylWall™ II flat wall system, including thermal spacer blocks and fiberglass blanket insulation.
  • Thermax insulation board further increases energy efficiency.
  • Concealed fasteners create a smooth, monolithic exterior.
  • High-performing Butler-Cote™ 25-year fluoropolymer finish resists chalking and fading.
  • Versatile system can be used with Butler roof and structural systems for all building types.

button


StylWall™ II Fluted Wall System

StylWall™ II Fluted Wall System features an attractive ribbed wall system with concealed fasteners for a consistent appearance.

Features & Benefits

  • Attractive broad-ribbed design and embossed pattern produces interesting shadows and consistent texture
  • Special joint design allows panels to “snap” into place, allowing the joint to be hidden deep within the recess of the box ribbed design
  • Can be combined with other Butler® wall systems or brick, glass, and other conventional materials
  • 16” panel width, combined with the side “return leg,” enables application of almost any conventional finish on the interior of the wall system
  • Can be easily insulated with a wide variety of insulation systems—batt, blanket, or rigid board
  • Available in several visually appealing colors

button


eStylWall™ II Fluted Wall System

eStylWall™ II Fluted Wall System is ideal for new or retrofit building applications, including community, commerical and industrial facilities.

Features & Benefits

  • Deep-ribbed exterior wall system is architecturally pleasing and creates unique shadow effects.
  • Concealed fasteners further enhance panel appearance.
  • Enhanced energy efficiency through the unique assembly design of the eStylWall fluted wall system, thermal spacer blocks and fiberglass blanket insulation.
  • High-performing Butler-Cote™ finish system warranted for 25 years against fading and chalking.
  • Available in a range of “cool” colors that carry a Solar Reflective index up to 92.

button


TextureWall™ Panel Wall System

TextureWall™ Panel Wall System is a factory-insulated metal wall system with a durable stucco-like appearance.

Features & Benefits

  • Features Texture-Cote™ finish system—a hard, aggregated, fiber-reinforced polymer finish
  • Resists the effects of impact, abrasion and weather
  • Can be erected in virtually any weather conditions
  • Interior panel face is finished in an attractive fineline configuration with a polyester white color and can also be used to apply other conventional wall materials
  • Panels are fastened to the structural system with concealed fasteners for a uniform appearance
  • Available in four popular colors
  • UL listed for 1- or 2-hour fire resistance assembly (UL U652)
  • Offers a full 10-year warranty on material and application

button


Butler Thermawall™ Fluted, Fineline and Flat Wall System

Butler Thermawall™ Wall System is a factory-insulated wall system with concealed fasteners.

Features & Benefits

  • Choice of three exterior panel designs
    • Fluted panels feature a surface with deep corrugations
    • Fineline panels utilize shallow corrugations
    • Flat panels create a smooth embossed surface ideal for architectural applications
  • Panels are available in 2-, 2-1/2-, 3-, and 4-inch thicknesses to meet your thermal performance needs
  • Features Butler-Cote™ finish system, a Kynar 500® or Hylar 5000®fluoropolymer high performance finish in a variety of available colors
  • Interior face is finished with an attractive fineline configuration with a polyester white color
  • Concealed fasteners for a smooth, uniform appearance

button